Forum Replies Created
-
Posts
-
The DDR 3 Resistivity Meter is a specialized version of IGIS Resistivity meters designed for use in Resistivity surveys up to about 200m depth. It utilizes rechargeable batteries as power source to energize the ground thus eliminating the necessity of using the relatively expensive dry cells
The process of power Transformer distribution to our homes is something that is more organized and well executed. Only then it will effect with the consistent Power supply till then.There is somewhat consistency should be maintained..
Transformers in India
First try to understand, When choosing a frequency converter understanding the equipment’s requirements and capabilities is key to finding the right fit. If the equipment is required to perform in an international environment, weigh the cost of the converter against the cost of replacing the equipment to be powered..
Inductor Coil Manufacturer in India
The installed power is the sum of the nominal powers of all power-consuming devices in the installation. This is not the power to be actually supplied in practice.
Yeah! “Wireless power transfer works on the inductive power transfer principle, as found in the conventional transformers.”
From cable/wire sizing calculation we can estimate the proper size for cable to our wiring installation project.
Primary function of a frequency converter in aquatic applications is to provide energy savings. By controlling speed of a pump rather than controlling flow through use of throttling valves, energy savings can be substantial.
This type of fault is better than short circuit fault, because when the open circuit fault occurs, then the flow of current through an underground cable becomes zero. Once check whether the circuit working or not.
The loss in a transformer compares the input, or primary power, to the output, or secondary power. Most transformer data show their input and output voltages and the current ratings of both sides.
“LED” Stands for “Light-Emitting Diode.” An LED is an electronic device that emits light when an electrical current is passed through it. Early LED’s produced only red light, but modern LED’s can produce several different colors, including red, green, and blue (RGB) light. Recent advances in LED technology have made it possible for LED’s to produce white light as well.
