Home › Electrical Engineering Forum › General Discussion › Domestic wiring regulation for SA
- This topic has 1 reply, 2 voices, and was last updated 14 years, 3 months ago by georgepalaganas.
-
AuthorPosts
-
2010/08/31 at 2:50 pm #10213adminKeymaster
Where can I find a copy of the above?
2010/09/21 at 9:03 am #11432georgepalaganasParticipantYou may Check-Out http://www.eltafans.com/info-centre/domestic-commercial/e-brochure/se_range.pdf
Axial Flow Fans
Domestic & Commercial
SE Range
SE range
features & benefits
Features & Benefits
Motor protection – Each SE motor is double insulated
so no earth is required with integral thermal overload
protection which prevents the motor from overheating.
Range – There are three sizes, 100mm, 125mm and
150mm.
Options – The SE range, dependant on model, incorporate
a run on timer adjustable between 3 and 15 minutes;
a dynamic type humidistat with anti–hunting feature; and
can be operated via a pull cord.
Safety – SE fans are IPX4 Splash proof, protected against
water splashing from all directions which means they can
be safely installed in Zones I and II in accordance with IEE
Wiring Regulations.
Ease of installation – Designed and supplied with all the
necessary fixings, with unique features to make installation
easier.
Material strength – Units are manufactured from shock
proof, heat resistant white plastic, which is durable and
non corrosive.
Mounting – Each unit is suitable for window, wall, panel or
ceiling mounting installations.
Full ancillary range – Wall kits, window kits, fan locking
rings.
Reliability – Motors have sealed for life bearings.
Warranty – Each SA has a 2 year warranty.
Applications
Shower rooms, bathrooms, kitchens, utility rooms,
residential and commercial facilities.
The SE “Executive” Axial Range is a stylish range of slim profile axial flow fans which provides
powerful extract of air through windows, walls, ceilings and panels for a variety of domestic and
commercial applications.
· 3 standard sizes from 100mm to 150mm.
· Air volume flow rates of up to 0.088 m³/s (317 m³/hr).
· Static pressures of up to 80 Pa.
· Axial impeller design for larger volumes.
· IPX4 – Splash proof.
· Shock proof, heat resistant plastic.
· Suitable for operating temperatures up to 40°C.
· Motors are double insulated with built-in thermal overload protection.
· CE Marked and BEAB approved.
· Sealed for life ball bearings to operate at any angle.
· Timer models adjustable from 3-15 minutes.
· Front plate fascia protrudes between 8mm and 15mm dependant on model, providing one of the slimmest profile fans on the market
· Lower noise levels.
SE range
product information
SE100 Basic unit, fan only
SE100T Run on timer unit
SE100C Pull cord operated unit
SE100HT Humidistat, timer and neon light unit
SE125 Basic unit, fan only
SE125T Run on timer unit
SE125C Pull cord operated unit
SE125HT Humidistat, timer and neon light unit
SE150 B Basic unit, fan only
SE150T Run on timer unit
SE150C Pull cord operated unit
SE150HT Humidistat, timer and neon light unit
Product Code Description
SE100 230 27 97 √ √ √ √
SE100T 230 27 97 √ √ √ √ √
SE100C 230 27 97 √ √ √ √ √
SE100HT 230 27 97 √ √ √ √ √ √
SE125 230 53 191 √ √ √
SE125T 230 53 191 √ √ √ √
SE125C 230 53 191 √ √ √ √
SE125HT 230 53 191 √ √ √ √ √
SE150 230 88 317 √ √ √
SE150T 230 88 317 √ √ √ √
SE150C 230 88 317 √ √ √ √
SE150HT 230 88 317 √ √ √ √ √
Product Code Voltage Maximum Volume Mounting Arrangement Operation
l/sec m³/hr Ceiling Wall Window Fan Only Pull Cord Run on Timer Electric Shutter Humidistat PIR
Note: The SE Range is not suitable for Duct or Roof mounting
dimensional data
SE range
Product A B C D Weight
Code kg
SE100 140 8 98 98 1.0
SE125 170 15 45 100 1.2
SE150 190 15 60 112 1.4
A
ØD
B C
Volume – m3/s
Pressure – Pa
0
10
20
30
40
50
60
70
80
0.00 0.02 0.04 0.06 0.08 0.10
SE125
SE150
SE100
Model SE100 SE125 SE150
Diameter. 100mm 125mm 150mm
Volts. 230 230 230
Watts. 15 20 25
r/min 2500 2450 2100
l/sec. 27 53 88
Max Pa. 30 50 80
dBA @ 3m 39 41 43
SE range
performance & electrical data
accessories
flexible wall sleeve kit
· Comprises durable white plastic grille for external mounting
· 3 metres of pvc flexible duct
SK100SAWKFlex FLEX 100 100 356 0.305
SK125SAWKFlex FLEX 125 125 356 0.385
SK150SAWKFlex FLEX 150 150 356 0.474
GRILLE 100 154 42 98 18 0.114
GRILLE 125 200 58 123 28 0.210
GRILLE 150 200 58 148 28 0.210
Product Code A B Weight
kg
D E F G Weight
kg
accessories
external wall grille
Product A B C D Weight
Code kg
SKGW-100D 154 42 98 18 0.114
SKGW-125D 200 58 123 28 0.210
SKGW-150D 200 58 148 28 0.210
A B
ØC
D
· Durable white plastic
· Mounted independantly of fan
accessories
fan locking ring
Product A B C Weight
Code kg
SK100SACR 100 132 15 0.048
SK125SACR 125 155 26 0.075
SK150SACR 150 187 26 0.100
ØB C
ØA
· Durable white plastic
· Fits directly to fan allowing easy installation without fixing screws
accessories
shutter
Product A B C D Weight
Code kg
SKFLW-100D 154 42 98 18 0.078
SKFLW-125D 200 58 123 28 0.178
SKFLW-150D 200 58 148 28 0.182
A B
ØC
D
· Durable white plastic
· Opens automatically with airflow
· Mounted independently of fan
SK100SAWKTLSCOP SLEEVE 100 100 105 203/355 0.305
SK125SAWKTLSCOP SLEEVE 125 125 130 203/355 0.385
SK150SAWKTLSCOP SLEEVE 150 150 155 203/355 0.474
GRILLE 100 154 42 98 18 0.114
GRILLE 125 200 58 123 28 0.210
GRILLE 150 200 58 148 28 0.210
accessories
telescopic kit
Product Code A B C Weight
kg
C
ØA
ØB
ØF
E D
G
· Durable white plastic grille for external mounting and rigid, white plastic
telescopic sleeve.
· Minimum length of 215mm and maximum length of 380mm
D E F G Weight
kg
accessories
single glazing kit
Product A B Weight
Code kg
SK100SAWKSG 150 53 0.195
SK120SAWKSG 180 56 0.280
SK150SAWKSG 208 70 0.380
A SQUARE B
· Comprises durable white plastic external
grille and ceiling ring
· Allowing easy installation without fixing screws
accessories
backdraught shutter
Product A B Weight
Code kg
SK100-SEBDS 150 50 0.014
SK125-SEBDS 180 62 0.018
3rd ANGLE PROJECTION DO NOT SCALE IF IN DOUBT, ASK!
A DIA B
· Durable white plastic
· Opens automatically with airflow
· Mounts directly to fan outlet
Elta Fans Ltd – Applied Technology Elta Fans Ltd – Building Services
17 Barnes Wallis Road, 46 Third Avenue,
Segensworth East Industrial Estate, Pensnett Trading Estate, Kingswinford,
Fareham, Hampshire, P015 5ST, United Kingdom. West Midlands, DY6 7US, United Kingdom.
Visit: eltafans.com e-mail: mailbox@eltafans.co.uk
Applied Technology: Tel: +44 (0) 1489 566500 Fax: +44 (0) 1489 566555
Building Services: Tel: +44 (0) 1384 275800 Fax: +44 (0) 1384 275810
Export: Tel: +44 (0) 1489 566500 Fax: +44 (0) 1489 566555 -
AuthorPosts
- You must be logged in to reply to this topic.