Home › Electrical Engineering Forum › General Discussion › Stainless Steel pipes in standard pipe earthing inplace of GI Pipe
- This topic has 2 replies, 3 voices, and was last updated 14 years, 3 months ago by
Raju Tamakuwala.
- AuthorPosts
- 2011/09/11 at 10:56 am #10627
MK Saxena
ParticipantIf cost is not a constraint then can we use stainless steel pipe in place of GI pipe in a standard pipe earthing? Kindly also send your comments in detail on this topic.
2011/09/12 at 7:48 am #12494SANAVI
ParticipantNO,BECAUSE OF HIGH CONTAIN OF CARBON PERCENTAGE COMPARE TO SS METALS AS WELL AS ALSO PROBEM OCCUR DURING TERMINATION DUE TO CARBON DEPOSITION,IF YOU WANT TIMEBEING ARRANGEMENT THEN ITS ACCEPTABLE ONLY FOR LOW ELECTRIC LOAD.
2011/11/30 at 5:22 pm #12577Raju Tamakuwala
ParticipantBasically I was associated with one of
the leading power distribution company in Gujarat at Surat city & having
experience of 25 years in the field of distribution transformer & medium
voltage switchgear {Ring Main} maintenance and servicing. During my tenure I
observed that 70% root cause of all failure due to poor earthing. So after long
journey of R & D I had developed innovative product like, Chemical Earthing
Or say Safe Earthing electrode and Lightning protector.Please visit folowing links
http://picearthingtech.com/services.html
http://www.linkedin.com/groups/ELECTRICAL-POWER-GROUP-4187446?gid=4187446&trk=hb_side_g
- AuthorPosts
- You must be logged in to reply to this topic.