I have found a new electrical software on Internet: Simaris Design Basic. It is a software for electrical installation calculation: short-circuit calculations, cables sizing and protection devices choice and settings. This is a new version. I knew the old version of this software – 1.5, which is not available any more.
I have downloaded the software from Internet. The good point is that it is available in several languages (the previous version was only in German and English).
This design software has the following functionalities:
- Output rating requirements of the feeders
- Cable cross sections and number of cores required for the LV power cables/lines
- MV switchgear and LV protective devices
- Distribution board type and enclosure space requirements
There is an export to Word and Autocad, which is a good point.
However, a lot of components are still missing, there is no power factor correction, no UPS and the motor starting is very limited.
Also, there is no enough information about the Standards used in the software (for short-circuit calculation, cables sizing and etc.). According to Internet, the software is dimensioned according to the VDE and IEC standards, but which exactly ?
Christian Petrov
pls send a copy for trial implememntation software for Calculator Electrical Installation.thank you very much.
of course you cant use some components like ups but for calculation you don’t need this components.it is about desing not about calculation.there are some problems about simaris but at the all i think it is useful program.the main question is this? why i have to use this program cause i can create some documents with excel.simaris have to be more useful.
that nice pls send me your software i am electrician
Nice article,do send me detail on this softwares
pls send a copy for trial implememntation software for Calculator Electrical Installation.thank you very much.
I am so glad see you guys exploring SIMARIS design since I am a promoter for this tool. I just wanna tell Christian Petrov that in the latest version which launched in April, 2009 as (SIMARIS Design 5.0) the motor starters is very detailed. You can select a DOL, start-delta, softstarter or even a VFD.
Also, you can size your power factor correction by checking the Kvar value. then you can add a capacitor based on this value.
I do agree that still you can’t use UPS. Hoping this will be added shortly.
Regarding the standards SIMARIS follows for all calculation, you can find it once you run your input as “Project documentation”. In the last page, you’ll find all standards in details.
Please let me know if you have any question on SIMARIS Design
Mohammad
Dear Mr. Mohammed,
Can u please train me to use the product. i got the trial version but i am uncomfortable with this.
Regards,
Shakeel Ahmad
00971-50-4433841
I need Electrical design Software could any one send on my Email ID : engr_mamoor @yahoo.com
I will be very much obliged. thanks
Hello Mohammad,
I am using SIMARIS-Design 7.0.0 version. I would like to model my network LV (low voltage) only, but SIMARIS-Design requires MV (Medium Voltage) data also. Could you pls advise how can i model low volatge data only ? Pls note that i am beginner user of this software.
I am looking forward for your reply.
Thank you
Regards,
Afshar
I am very happy using software SIMARIS SIEMENS. very easy and exciting result to implementing Electrical design. We need using software HVAC.suite can any suply?. thank you very much.
Pls advice, i have Software HVAC Trial, but now i need unlock code for Permanent Running. HVAC Suite version 1.
would you mind if you send me the software
oh! may be its good software for who studying electrical and electronics courses…
can anyone send me this software to my email address..
hatin.x@hotmail.com
thanx in advance.
can anyone send me this software to my email address: humamalbeedany@yahoo.com
Please send the soft ware to my mail box. Kaja_okoli@yahoo.com
plzzz send me complete document of this software on mail …..i want to do final year project on this topis
Electrician Education Requirements…
As an electrician may be an impressive work that we do in many places, and help the person to earn a high salary in process. It ‘important to know that there are some important training requirements that are not covered by an electrician. Work as…
please send sofware electrical design, i very like that, thank you veri much
please send a copy of the software for evaluation, thanks a lot
please send me a copy of the software, thanks a lot: reneauxx@yahoo.com
Can anyone send me a copy of this software?
I highly appreciate your support
i appreciate to have the software. i am electrical designer
I,m electrical panels designer ,can anyone send to me the software for industry& buildings.
thank you .
azmisaed@ymail.com
Thanks. Been working as an electrician for a little while now so this is useful.
Please I need this software
Could you please send it to me
Pleaaaaaaaaaaaaaaaaase
Please I need this software
Could you please send it to me
Pleaaaaaaaaaaaaaaaaase
Basheeralshami (at) gmail . com
How would I be able to get hold of this software?
The article has a link directing to the site for the software. You can have a look at it there.
Can you send me that software? I’m also electrical engineer who is now lecturing in University.Can i use it for students?
my mail is frenchma1221@gmail.com
hi
I am electrical engineer,and I like to have your software please sent to my email box:powermen_epi@yahoo.com
These are truly enormous ideas in on the topic of blogging.
You have touched some pleasant things here. Any way keep up wrinting.
Hello Mohammad,
I am using SIMARIS-Design 7.0.0 version. I would like to model my network LV (low voltage) only, but SIMARIS-Design requires MV (Medium Voltage) data also. Could you pls advise how can i model low volatge data only ? Pls note that i am beginner user of this software.
I am looking forward for your reply.
Thank you
Regards,
Afshar
Excellent way of describing, and good piece of writing to take facts on the topic of my presentation subject, which i am going to deliver in academy.
Thanks for sharing.