- This topic has 4 replies, 4 voices, and was last updated 13 years, 6 months ago by
.
-
Posts
-
For smart grids applications in medium voltage networks, I wonder which type of protection is the most suitable, circuit-breaker or fuse ?
In terms of service continuity, integration of renewable energy, network management in general …
I total agree with the point that circuit breaker more convenence in operation than fuse. In case of failure of electrical system such as overvontage or short circuit.etc, you have to replace the old fuse by new one, in the other hand, if you use circuit breaker, one action you must do is turn switch on. :)
However, if your budget is limited, fuse-disconnector is the best solution that saving your investment almost 50%.
From your question: ” In terms of service continuity, integration of renewable energy, network management in general …”, circuit breaker is prefered.
i think if you want have a safty system in this fild of industerial you must use from good tools and compnnent whit out think about cost and i think you should use circuit-breaker.
have a good time
have safe time
- You must be logged in to reply to this topic.