Shared Electrical Calculation Tools between members
Do you know that the library of Electrical calculation tools shared by members still exists?
Here are the last tools shared :
1. EN-Residential_Load_Calculation.xls
2. EN-Busbar_size_calculation.xls
3. EN-Battery_size_Calculator.xls
4. EN-Touch_Voltage_Ground_current.xls
In order to access these tools a username and password is required which will be sent to you once you share your own electrical calculation tool with the other fellow members.
To share your tool with the other members, simply send it to us by mail as an attachment, with a short description about what the tool does.
Moderator team
 |
This month let us introduce you one of our forum members: Alen Matanovic |
Engineer graduate from ETFOS
Living in Croatia
Power Engineering is the subject which interest him the most
Visits the forum because he thinks it's interesting
If you would like to become a moderator yourself, you can tell us by mail |
|
|
Choosing and comparing the best energy data logger to install in your panels for small buildings in 10 minutes |
 |
Panel builders, installers, engineering department,...Before the multiplication of energy efficiency solutions to install in the small buildings and commercial buildings, you are facing many difficulties to choose the best technology for the energy collection; the one which will address the needs of your customers, while being easy to use and to install.
The lack of information, knowledge and means makes you take a risk and also lose valuable time.
Installing an inappropriate device, partially replying to the technical requirements specifications, calling on a local collaborator whom reliability and reputation remain uncertain, taking a specific programme causing additional cost, is a significant risk factors and does not guarantee the working of your installation.
A lot of panel builders - maybe like you? - do not even respond to a call to tender involving energy efficiency solutions! Yet, theses are increasing demands and you won't be able to develop your company without incorporating these solutions in and earning this expertise.
Facing this issue, we decided to go into action to test solutions for energy data logger for small buildings and commercial buildings. Here is how we made these tests:
We dissociated two aspects:
The connectivity of the data logger and the interfacing possibilities
The configuration of the software (i.e user-friendliness and features)
We've rather compared solutions intended for panel buildings and products from manufacturers who propose offers available in the greatest number of countries.
Check the rating of the solutions below:
|
|
|
Inspection and testing of Wiring Installations |
 | Periodic inspection and testing of internal wiring installations is necessary. Internal wiring should be checked every year for safe operations. While carrying out inspection and testing of internal wiring installations, come points should be checked. This article tells you which ones.
|
Manish, a member of the community sent us the following article in which he tells us how to inspect and test your wiring installations. We thank him! Will you be the next one to post an article on the blog?
|
MORE>> |
|
 |
|
