Home › Electrical Engineering Forum › General Discussion › Best electrical calculation software review
- This topic has 45 replies, 10 voices, and was last updated 8 years, 10 months ago by Anonymous.
-
AuthorPosts
-
2010/11/30 at 1:32 pm #11654adminKeymaster
Have any of you ever heard of a software called Volts? It's made by a company called Dolphin. They're located out in California. It's very handy. It actuallly sizes the electrical system taking every adjustment factor into account. It also creates a one-line diagram.
2010/12/01 at 4:33 pm #11656Krishnamurthy Srinivasamurthy PrakashParticipantRequest you to review on schneider software ID Spec Large, it is much advanced then, the my ecodial L 3.4.
2010/12/13 at 12:51 pm #11673AnonymousGuestI agree on the comparisson indicated above, but i tried DocWin, which almost cover all features mentioned except for switchboard coupling but rest of elements such that but not limited to, transformer sizing, cable sizing, busway sizing, short circuit calc., voltage drop calc, ups effect, motors,
2010/12/21 at 9:20 pm #11690adminKeymasterAdrian said:
PowerCad-5 electrical design software ticks all the boxes plus includes, Schneider, Terasaki, NHP, GE switchgear
PowerCad-5 is good but does not include the latest range of Schneider equipment so we often have to use Ecodial when using the NSX style breakers
2011/01/28 at 2:24 pm #11766LaurentParticipantCould you tell us how Trace Elec compares to the other software presented ?
Or the main reasons why you chose this software ?2011/01/28 at 2:26 pm #11767LaurentParticipantAlen Matanovic said:
does anyone here have any experience with EasyPower from ESA??
it's really good and simple/friendly user programe, but it's more orientated to voltages over 1kV,, e.g. transimission and distribution..
also, there's free demo version, fully working, but saving and printing/exporting options are unavailable..
sorry for my bad english,, i'm no native speaker..
cheers,, alen ;)..
Hello Alen,
the software you mentioned is for High Voltages, as you said.
Are you also involved in Low Voltage, and if yes what software do you use today ?
2011/01/28 at 2:34 pm #11776LaurentParticipantALPI-Caneco said:
Hello,
A couple of precision about Caneco BT:
– LV genset source supply is possible at any place in the network.
– Caneco BT is calculating in normal and stand-by installation configuration.
– Also Caneco BT multi-manufacturer database integrates technical settings. This allows Caneco BT to make an automatic selection of most adapt cables and protective devices between 10 manufacturer catalogs.
– Caneco BT also makes Import/Export from/to Excel.
I keep at your disposal for any further information.
Laurent Berthelin
ALPI Sales Manager (Caneco BT software editor)
Hello,
I used Caneco in a previous job, and I was not aware it was possible to place LV Genset anywhere in teh network
==> is it a new functionality?
==> if not, do you have a demo available somewhere which shows this functionality?
2011/01/28 at 2:59 pm #11777AnonymousGuestHello, to get a version of Ecodial you can contact your Schneider Electric delegate in your country.
To know more about the software a Quick Tour is available for the internationnal version by using this link:
http://www.soft.schneider-electric.com/myecodialL.htm2011/03/04 at 12:16 pm #11876adminKeymasterLaurent said:
Hello,
I used Caneco in a previous job, and I was not aware it was possible to place LV Genset anywhere in teh network
==> is it a new functionality?
==> if not, do you have a demo available somewhere which shows this functionality?
Hello Laurent,
LV Genset source supply can be placed anywhere in the network since Caneco BT 4.4 version (2002).
Since Caneco BT 5.1.6 (2006), this genset can supply several boards in various point of the network.In order to select connexion point for a board, just use Supplies / Standby connection menu as shown in this screen-shot:
I keep at disposal for any further information.
Laurent Berthelin
ALPI Sales Manager (Caneco BT software editor)2011/07/21 at 1:50 pm #12343Ally KanyondoParticipantDear All,
The mentioned software are Good but the best one is SOLUTIONS ELECTRICAL SOFTWARE. Currently im using this software.
IT is capable of doing the following:-
CABLE CALCULATIONS
CIERCUIT DESIGNER
INSTALLATION SIMULATOR
AIR CONDITIONING SIZES
HEATING CALCULATIONS
HEATING ELEMENTS
SHORT CIRCUIT CALCULATIONS
TEST INSPECTION FORMS
ISTALLATION OPTIMIZER
ELECTRICAL ESTIMATOR
PROTECTION AND COORDINATION
BOARD TEMPERATURE
POWER FACTOR CORRECTION
TRANSFORMER REGULATION
MAX DEMAND FOR DOMESTIC
MAX DEMAND FOR INDUSTRIAL.
I advise you to try on this software.
For more informations you can visit the following web: http://www.solutionselectricalsoftware.com
Kind regards
2011/08/27 at 8:51 am #12374AnonymousGuestThanks for the great comparison of the best electrical calculation software. I think I’m going to try Simaris Design 5.0 after reading the above post. I will update you if this will work for me…
2011/08/28 at 6:07 am #12444prabhaParticipantThis is the easy way to calculate and safe working..in field
2011/10/27 at 11:34 am #12589AnonymousGuestDear Krishna Murthy/Srinivas muthy /Prakash,
Let me know that voltage drop sofware is available in market, please suggest us with new version.
2011/11/01 at 8:48 am #12618AnonymousGuestdear ALLY ,
how can i download this software
can u share it with me
plz try to contact me2011/11/11 at 7:00 am #12634AnonymousGuestI like this. This is a very big help all people. Thanks.
-
AuthorPosts
- You must be logged in to reply to this topic.