Solar Panels Optimization using MPPT Controllers

May 14th, 2019 | Posted in Energy Efficiency - solar
Tags: , ,

Figure 1. Scheme of a Solar Generation System [2]


Solar Panels: context

The generation of electric power from renewable energies is the new boom in the world market. There are different types of clean energies from natural sources such as the sun, winds, tides, etc.

In particular, the energy from the sun has some advantage over other types of energy. It is theoretically feasible in almost all the terrestrial globe. Harvesting solar energy is possible now thanks to the photovoltaic cells.

TOP 5 Best Sellers solar panel on amazon

Bestseller No. 1
1000W 24V Hybrid Wind and Solar Power DIY Off-Grid Kit - 400W Wind Turbine + 6x100W 12V Mono Solar...
2 Reviews
1000W 24V Hybrid Wind and Solar Power DIY Off-Grid Kit - 400W Wind Turbine + 6x100W 12V Mono Solar...
  • Daily power generation of 3-4KWH combined with a 50A solar controller and 16ft of MC4 connector cables keeps 24V battery systems charged or power hungry appliances running
  • 400W 5-blade wind turbine allows for power generation around the clock, combined with high efficiency monocrystalline solar panels for more power per square foot
  • Designed for RV's, cabins, boats, backup power generation, remote power needs, around the home such as sheds, barns, or outbuildiings, or any powered project
  • Corrosion and weather resistant allowing for decades of use with an efficiency guarantee of 15 years (90%)
  • Pre-drilled holes allow for easy mounting of solar panels. Note a pole for the wind generator is not included
Bestseller No. 2
500W 12V DIY Solar Power RV Boat Kit - 5 x 100W Mono Solar Panels + 40A MPPT Controller + 16 Feet...
  • Power Your Day: With an average daily power generation of 2.2KWH combined with a 40A solar MPPT controller, plan for the future with expansion options of up to 1080W at 24V
  • High Efficiency Solar Panels: Monocrystalline solar panels provide more power per square foot than similar polycrystalline panels, allowing for a higher charge rate to keep those batteries charged and...
  • Limitless Options: An ideal system for RV's, boats, cabins, camping, or around the home for barns, outbuildings, and sheds. Contact us with any questions around a custom project
  • Long Lasting Power: Corrosion and weather resistant design allow for decades of use with a 25 year transferable warranty
  • Ready To Go: With pre-drilled holes for easy mounting, and combined with 16 feet of Male/Female MC4 cables, installation is a breeze no matter where your setting up
Bestseller No. 3
ECO-WORTHY 480W Monocrystalline Off Grid Solar Starter Kit: 3pcs 160W Mono Solar Panels + Solar...
  • High conversion efficiency 160 watt monocrystalline solar panel for RVs, cabins, homes, boats, back-up and remote power use. Perfect for 12-volt battery charging or multiple panels can be wired in...
  • Easy to install with pre-drilled holes on the back of panels for fast mounting and securing. Each solar panel comes with 90cm 12awg cable with MC4 Male/Female quick connectors.
  • By-pass diodes are pre-installed in waterproof IP-65 rated junction box to minimize power drop caused by shade and ensure excellent performance in low-light environments.
  • Corrosion-resistant aluminum frame for extended outdoor use, allowing the panels to last for decades as well as withstand high winds (2400Pa) and snow loads (5400Pa), Lightweight anodized aluminum...
  • One year warranty, please feel free to contact us if there's any questions.
Sale 2019Bestseller No. 4
XINPUGUANG 100w Flexible Solar Panels 24V 1000W Solar System Kit Monocrystalline Cell Module 45A...
1 Reviews
XINPUGUANG 100w Flexible Solar Panels 24V 1000W Solar System Kit Monocrystalline Cell Module 45A...
  • 【Solar System】The solar panel is suitable for OFF-Grid Solar Power systerm or multiple panels can be wired in series for 24/48-volt battery charging or for grid-tied applications
  • 【High Reliability】+/-3% output power tolerance and can withstand high wind-pressure, snow loads and extreme temperatures.
  • 【Flexible】 This panel is a good choice for curved surfaces of RV, boat,sailboat, yacht,truck, car, coach, cabin, camper , tent , trailer, golf cart or any other irregular surface.
  • 【Reliable】 Advanced encapsulation material with multi-layered sheet laminations to enhance cell performance and provide a long service life.
Bestseller No. 5
AUECOOR 500W Home Grid Tie Solar Kit 5pcs 100W Monocrystalline Solar Panel & 1000W Power Grid Tie...
  • High efficiency and output : This solar panel module conversion efficiency can comes up to 20.5%, It has excellent performance even in low-light environments.
  • Multiple ways of connection of the solar panels, supporting parallel, series, or a combination of the two; For on-grid System. Perfect for all of life's adventures.
  • This panel is designed to withstand high wind and snow loads, offer weather-resistant outdoor durability and longer life span. Corrosion-resistant aluminum frame for extended outdoor use, allowing the...
  • Easy Installation: Compatible with different AUECOOR mounting systems such as Z-Brackets, Pole Mounts and Tilt Mounts.Diodes are pre-installed in junction box and a pair of 90cm cables with MC4...
  • Warranty:6-year material and workmanship warranty,25-year power output transfer warranty;friendly 24H/7D service.Solar kit will be delivered in multiple packages .


Solar Panels: issues

The solar cells are connected, typically, to a DC-DC converter or to a DC-AC converter, depending on the application. We can observe the scheme of a system with both converters shown in figure 1 to illustrate us.

Additionally, the cells have an I-V and P-V curve, as shown in Figure 2, obtained by tests with controlled conditions. It is evident that the power supplied by the module is dependent on the connected load; that is, it is not possible, automatically, to get the most out of the solar panel, especially in large arrays in series, parallel, or parallel series. The tracking algorithm of the point of maximum power transfer is developed to solve this problem, using the power curve supplied by the panel with respect to its voltage.


Figure 1. Scheme of a Solar Generation System [2]

Figure 1. Scheme of a Solar Generation System [2]

Figure 2. Characteristic curves to I-V (solid) P-V (dotted) at different radiation values

Figure 2. Characteristic curves to I-V (solid) P-V (dotted) at different radiation values


Solar Panels Optimization: what is MPPT?

The device that allows to charge a battery is the DC-DC converter, also called the charge controller. There are two main kinds of charge controllers in the market, the MPPT and the PWM. The performance of PWM devices has been proven to be less effective than MPPT charge controllers, which is why there is an interest to understand how does these devices work to optimize the performance of solar panels power output.

The MPPT is an algorithm used in the DC-DC converters to obtain the maximum power of the photovoltaic modules, for this, the duty cycle of the converter is varied, managing to vary the voltage of the module to the point of maximum power.

It should be noted that this point varies with temperature and solar radiation; therefore, it is constantly changing. There are several algorithms to find the MPP, among the most used by the literature we can find: Disturbs and observes (P & O), Incremental Conductance and Fuzzy Logic [4] [5].


Solar Panels Optimization: the Disturb & Observe Method

This is an algorithm derived from the hill climb method. By varying the voltage (which is produced by modifying the duty cycle) the power is varied.

In Figure 3 we can see the diagram flow of this algorithm, as we see, we have the values ​​of the current and previous iteration, from the comparison of these two variables we determine the action that must be taken to reach the MPP of the photovoltaic module.

The facts mentioned above can be explained in the following way. There are always two variables that are constantly been evaluated, one of them is current and the other is voltage. These parameters change instantly, and the power differential obtained from the previous instant indicates whether or not the MPP is located above or below.

If the power differential is positive, then the voltage must be compared with the previous one, if it is bigger, then the duty cycle must increase in the same differential, while if it is smaller, then the duty cycle must be reduced in the same way. This means that the point of operation of the PV system will move forward in the curve looking for the maximum power point.



Solar panels represent an important investment with a return rate located in the medium and long term. It is then necessary to maximize the power that each module or the complete array is capable of delivering at all times.

Based on this algorithm choosing an MPPT charge controller ensures that the solar energy produced by the panels will be used at the maximum point throughout the day, especially in small installations.

It should be noted that the efficiency of this method is approximately 96%, but it can be improved if the rate of change of the work cycle is decreased as the algorithm reaches the point of maximum power.


Figure 3. MPPT Algorithm Flow Diagram Disturbs and Observes

Figure 3. MPPT Algorithm Flow Diagram Disturbs and Observes




[1] Técnicas de optimización en paneles solares: seguimiento del punto de máxima potencia. Electronic (Navarrete2015). Available at:

[2] Soluciones en energías renovables para el hogar y la industria. disponible en:

[3] Solar energy for Sicily’s remote islands: On the route from fossil to renewable energy.Rosaria Ciriminna and Mario Pagliaro and Francesco Meneguzzo and Mario Pecoraino 2016.

[4] Solar energy. Olinto, Isabella. 2016

[5] Factibilidad de implementar energia solar fotovoltaica en las instalaciones de la Universidad Simón Bolívar. Bastardo F, Simeone S. 2019

Leave a comment

Spam protection: Sum of 1 + 8 ?

Electrical engineering Community, license Creative Commons License