5 most common starter device types (LV/MV motor starters)

Hi it’s Steven Mill. I think I’ve never written on this topic before, so let me tell you about motor starters…

starter device

A starter, more or less acts as a supervisor of the motor. It controls the power supply, defies switching of overloads, and also takes on the duty of disconnecting the motor from the mains, when deemed necessary.

As we can read about the topic:



“A starter can be defined as a combination electric motor controller, which can start or stop the motor with the help of external switches, protect the motors from getting overloaded, and disconnect them from the mains, in case of a serious power or load fluctuation, by taking help from the integral disconnecting devices.”



Most Important Components and Functions of a Starter

Contactors or Magnetic Controllers

Motor starting contactor is one the most common devices used to start low and medium voltage motors. In general terms, a contactor in an electrical device that switches itself on and off, in an attempt to protect electrical equipment when dangerous overloads begin to operate. These types of contactors are also known as magnetic controllers.

Contactor Vs Circuit Breaker

Contactor Circuit Breaker

It should be noted that, motor starting contactors are not designed to function as short-circuit breakers; in fact, they are designed to optimize the performance of low and medium voltage motors, and increase their life, by supporting them against the switching overloads.

Bearing this in mind, one should understand that, in spite of having a contactor in place, electric circuit still needs a circuit breaker for protection against short-circuits.

Note: Low and medium voltage motor starters are available with ratings as less as a fraction of a HP (horse power). These contactors can be of a great help in increasing the efficiency and the lifespan for low and medium sized motors which are mostly used for domestic purposes.

External Switches or Manual Controllers

External Switches Manual Controllers

Low power contactors are also available in the form of control switches, which can be operated manually. These are known as manual controllers.

They can be defined as a single device or a group of similar devices that help supervise the power that is supplied to a motor (or any electrical equipment) from the mains. Controllers are generally pre-programmed to operate under certain range of voltages that are pre-specified and are deemed to be safe, for the electrical equipment.

Combination Controllers

Low and medium voltage motor starters are also available as a combination of both contactors and controllers. This means the contactor in the electrical circuit can be controlled by humans externally with the help of control switches.

When these low and medium voltage motor starters are combined together, they are known as, “combination controllers.”


5 Most Common Starter Devices Types

Low Voltage Starter Types

Low Voltage Starter

Depending on the contactors and controllers in use, low voltage starters can be classified into Class A, Class B and Class V.

Class A: The Class A type starters are meant for motors that work on alternating current (AC). They come in three variations, namely:

  • Air-Break
  • Vacuum-Break
  • Oil-Immersed


All of these variations are available in either manual or magnetic controls. These starters are capable of withstanding voltages of up to 600V and can efficiently encounter overloads under normal operating conditions. They are not capable of encountering overloads, faults or short-circuits that occur beyond the operating overloads.

Class B: The Class B type starters are meant for motors that work on direct current (DC). They are of air-break starter type, and are available in either manual or magnetic controls.

These starters are capable of withstanding voltages of up to 600V and can efficiently encounter overloads under normal operating conditions. They are not capable of encountering overloads, faults or short-circuits that occur beyond the operating overloads.

Class V: The Class V type starters are meant for motors that work on alternating current (AC). They are of vacuum-break starter type and are available only with magnetic controllers.

These starters are capable of withstanding voltages of up to 1500V and can efficiently encounter overloads under normal operating conditions. They are also not capable of encountering overloads, faults or short-circuits that occur beyond the operating overloads.

This implies that, all most all types of low voltage motor starters available today are not capable of dealing with short-circuits that occur above the operating overloads. However, medium voltage motor starters are able to achieve this feat with much ease.


Medium Voltage Starter Types



Medium Voltage Starter

There are two basic types of medium voltage motor starters.

Class E1: As any other starters, Class E1 starters are also capable of starting and stopping a motor.

Apart from this, these starters are also able to interrupt short-circuits and faults that occur above and beyond operating overloads. They employ vacuum as an interruption medium to bypass the electrical equipment, from short-circuits and faults.


Class E2: Class E2 starters are also capable of starting and stopping a motor.

Apart from this, these starters are also able to interrupt short-circuits and faults that occur above and beyond operating overloads, and are equipped with fuses, that are capable of detecting the slightest of the interruptions, and isolate the electrical equipment instantly.

Class E2 type starters also employ vacuum as their medium to interrupt short-circuits and faults.

Thus, the above mentioned five types are the most widely used starters as far as low and medium voltage motors are concerned. Depending the voltage rating and the application if the motor, once can choose the best starter that fits their needs.

However, note that starters should always be chose on the basis of their ability to increase the efficiency and lifespan of a motor. They should not be chosen as a replacement for fuses or circuit-breakers.

What’s your opinion on that article? Feel free to comment in the comments section below.

Leave a Comment